User Tools

Site Tools


mirrors

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

mirrors [2014/02/06 14:38] (current)
Line 1: Line 1:
 +====== Mirrors ======
 +
 +
 +Fuse keep blowing? Mirror Switch not working?
 +
 +Possibly caused Check the wiring for the washer jets under the bonnet, repair/​clean the connectors, replace the fuse and test.
 +
 +The mirror has a friction/​spring joint. On the underside of the mirror near the joint there is a small black plastic cover held in by a drive pin. Under this is a '​nut'​ which determines the friction in the mirror joint. An unconventional nut which needs a special tool to tighten. It is a thick round nut with an internal thread and  two holes in it, requiring a special key to tighten it. 
 +
 +The black plastic cover is virtually impossible to remove without breaking and is NLA. Use a long nosed pliers to tighten. ​
  
mirrors.txt ยท Last modified: 2014/02/06 14:38 (external edit)